Skip to content
8

Cargo

A PAYLOAD CUBE is a 1.6 m box consigned to one receiver. A cargo head takes it on one held key, a HARDPOINT rack stores it, the same key hands it to the receiver, and APA pays the fare. This chapter is the handling, from the first metre of lasso to the last line of the receipt.

Unit
1 CUBE · 1.6 M · 1 RECEIVER
Keys
G GRAB · DELIVER · SHIFT + G AUTO GRAB
Capacity
1 TO 240 BERTHS
See also
5.2 RETICLE · 12.1 CARGO RUN
8.1

The PAYLOAD CUBE

ISO +Z +X +Y 1.6 M 0.76 0.41 PAD PITCH +Z · RAIL FACE 1.12 M 0.52 ±X ±Y · NAMEPLATE FACE
FIG 8.1-1One cube, three views, 100 px to the metre. All six faces carry the same mating socket; the rail face and the nameplate faces are the only way to tell one face from another.

Every cube is the same box. Any face seats in any berth or receiver, so a cube has no top and no front, and you never need to turn one round before a grab.

Edge
1.6 M
Mating socket
0.76 M · ALL 6 FACES
Contact pads
4 × 0.13 M · 0.41 M PITCH
Rails
2 · +Z FACE ONLY
Nameplates
1.12 × 0.52 M · ±X ±Y
Over the bosses
1.84 M
Berth pitch
2.12 M
Receiver opening
2.02 M
U UTILITY · LABEL DEST R868 APA CARGO MASS STANDARD · 100 CR BASE
FIG 8.1-2A nameplate, enlarged: class mark and class, destination receiver, custody, mass band and base fare. Line 3 changes with custody: APA CLAIM ACTIVE, DERELICT — CLAIM OPEN, APA ROUTING — STANDBY.
ClassMarkMass band
UTILITYUSTANDARD
TECHTSTANDARD
DENSEDHEAVY
RELICRLIGHT
LocationWhere the cube isSee
RACKEDIn the HELLA CUBE lattice, held by the field.3.1
FREELoose in space. A cut lasso, a fizzle or a jettison leaves a cube here.
CARRIEDIn a berth on a SHIP. Captive: impacts reach the hull, not the cube.8.4
DRONE CARRIEDOn a DRONE between a mouth and a receiver.9.3
SEATEDInside a receiver. Delivered.8.6
SHIPYARD STOREDTaken off the SHIP by STORE CARGO in a SERVICE PIT.10.2

The cockpit names a cube by call sign, CUBE- and four digits, derived from its APA identity. The call sign survives every change of custody; the nameplate's destination line does not, and reads UNASSIGNED until a claim names a receiver.

NOTEA cube in a berth is captive. A collision reaches the hull and the SHIP's motion, never the cube's condition. Condition is lost only while a cube is loose.

NOTEWhat a class pays and what condition does to it: 3.4 CONDITION AND FARE.

8.2

Grab and lasso

A grab is one held G, from the approach to the seat. The hold is re-read every frame, so press early: while nothing is in reach the plate says why, and the moment a cube is, the dwell starts. One hold takes one cube and stops there.

The head fires as lasso or arm by the range at the moment APA clears the claim, not the range when you pressed. Inside 3.5 M of face range the CAPTURE ARM reaches out and grips. Beyond it, with LONGSHOT fitted, the lasso flies and reels the cube in to 3.5 M, where the arm takes over.

1 2 3 4 5 6 7 8 9 0 Q W E R T Y U I O P A S D F G H J K L Z X C V B N M SHIFT SPACE ENTER
G DOWN LOCKING 0.85 · 0.45 · 0.55 S APA CLEARANCE PENDING APA CLEARED FIRES 02681012141618 3.5 STANDARD < 2 M/S · 35° QUICKJAW < 2 M/S · 52° LONGSHOT < 3 M/S TO FIRE · NO CONE OUT OF RANGEOUT OF RANGE ARM GRIP — SEATING ARM GRIP — SEATING ARM GRIP — SEATING REELING — KEEP HOLDING · 4 M/S STANDARD MASS · 5.8 LIGHT · 2.8 HEAVY ARM HANDOFF · G MAY BE RELEASED AFTER THIS LINE CUBE LOADED RELEASE G BEFORE THE HANDOFF: LASSO CUT. THE CUBE IS LEFT WHERE THE LASSO DROPPED IT, AT THE SHIP'S VELOCITY. FACE RANGE FROM THE HEAD TIP, M
FIG 8.2-1One hold of G. Left, the hold at the launch point, in time: the three LOCKING figures are STANDARD, QUICKJAW and LONGSHOT. Right, the capture by face range, to scale. Yellow is the META plate while the key is down.
GIMBAL ±62°ROOTSEATHEAD TIPSHOECUBE AT 3.5 MFACE RANGE, 20° OFF AXIS6.92 MREACHSTOCK SHIP FROM PORT SIDE · 1 M = 34 PX
FIG 8.2-2The CAPTURE ARM on the stock SHIP's P1 head: four telescoping stages on a gimbal, a four-pad shoe for a hand. It grips the face nearest its root and draws the cube down to the seat.
PhasePlate readsWhat is happening
WAITINGOUT OF RANGE · MATCH SPEED · …Nothing to act on yet. The plate names why. The hold stays live: close in while holding.
SELECTINGLOCKINGThe dwell fills. Moving the reticle to another cube starts it again.
CLAIMINGAPA CLEARANCEThe claim is with APA. Sent once, when the dwell completes.
CLEAREDAPA CLEAREDCustody is yours. The head fires as soon as the commit is eligible.
REELINGREELING — KEEP HOLDINGLONGSHOT only. Letting go cuts the lasso.
ARMARM GRIP — SEATINGThe CAPTURE ARM has the cube. Letting go no longer matters.
DONECUBE LOADEDOne hold takes one cube. It never chains to the next.
Arm, stages
4 × 1.85 M · 0.12 OVERLAP
Arm, reach
6.92 M FROM THE ROOT
Arm, gimbal
62° OFF THE HEAD AXIS
Pull
SPRING 2.2 HZ · CAPPED 3.5 M/S²
Seated when
WITHIN 0.06 M · 4° · 0.08 M/S
Shortest seat
0.28 S

Capture quality

Each capture is graded from how the cube was moving as the pull began. The grade travels with the cube to the receipt as CAPTURE ADJUSTMENT. Arrive slow and square.

BandClosing M/SLateral M/SAngleAlso
CENTER≤ 0.6≤ 0.35≤ 12°and peak load under 0.78
MIDDLE≤ 1.2≤ 0.8≤ 24°
CAPTURE———anything slower to settle

When a grab fails

EventCauseResult
LASSO CUTG released during the reel.Cube left free at the SHIP's velocity. Grab it again.
FIZZLECube more than 7 M from its seat, or not seated in 5 S.Cube released free, −1 % condition, 1 S before the next try.
LASSO PARTS22 M from the seat, 8 S of reel, or line of sight blocked for 0.15 S.As a fizzle.
REFUSEDAPA or the commit said no. The META plate names the reason.Hold ends. Press again.

CAUTIONA claim reserves a berth on one head, and APA lets the cube in by that head only. Grab with the camera of the head you claimed with; GRAB READY on another head ends APA HAS NOT RESERVED A BERTH FOR THIS CUBE.

8.3

PEERLESS heads

Every cargo head captures in STANDARD mode as issued. PEERLESS sells three modules on MARKET face 7, PHYSICAL CAPTURE SYSTEMS. QUICKJAW widens and quickens the near grab. LONGSHOT adds the lasso. DRAGNET presses G for you. Each fits the module grid and works on every head; none is a prerequisite for another.

NOTEThe reticle's MODE slot names what the selected head will do now: STANDARD, QUICKJAW or LONGSHOT. GRIP reads AT RANGE while a LONGSHOT target is beyond 3.5 M.

STANDARD 35°QUICKJAW 52°3.5 M FACE RANGEHALF-ANGLES ABOUT THE HEAD AXIS · 1 M = 34 PX
FIG 8.3-1Near capture, to scale. A cube whose centre lies inside the solid sector can be grabbed by a standard head; QUICKJAW opens it to the dashed one. Same 3.5 M reach.
LASSO PARTS22 M FROM SEAT18 M3.5 M · ARMFACE RANGE FROM THE HEAD TIP · 1 M = 8 PX
FIG 8.3-2LONGSHOT, to a smaller scale. No cone: any cube between the circles with a clear sightline from the head tip. Inside the dashed circle the arm grabs as in FIG 8.3-1.
ModeProductPriceGridDrawReachConeHoldFires belowNotes
STANDARDNo module. Every cargo head.ISSUED——3.5 M35°0.85 S< 2 M/SSpring 2.2 HZ, pull capped at 3.5 M/S². Fizzles past 7 M or 5 S.
QUICKJAWPeerless Quickjaw Capture Coupler650 CR1×20.4 KW · 2.4 WHILE CAPTURING CARGO3.5 M52°0.45 S< 2 M/SStiffer spring, 2.8 HZ. Catches at 0.16 M, 18°. Seats in 0.14 S minimum.
LONGSHOTPeerless Longshot Cargo Lasso1,800 CR2×20.6 KW · 4.6 WHILE REELING CARGO3.5–18 MNONE0.55 S< 3 M/SReels at 4 M/S. Parts at 22 M or after 8 S of reel. Hands to the arm at 3.5 M.
DRAGNETPeerless Dragnet Cargo Sequencer3,600 CR1×11.0 KW · 2.8 WHILE SWEEPINGAS FITTED≤ 60°—AS FITTEDAUTO GRAB. Queues up to 8, scans every 0.25 S, drops a target after 24 S.

LONGSHOT

The lasso fires only at the cube under the reticle, from the head whose camera is up. It reels at 4 M/S for a standard cube, faster for a light one and slower for a heavy one, and hands over to the arm at 3.5 M, in QUICKJAW if fitted. Below 0.35 of nominal power the reel is cut.

AUTO GRAB

SHIFT + G starts DRAGNET's sweep through the selected HARDPOINT camera. It claims, reels and stows one cube at a time, with whatever capture modules are fitted. While a cube already reserved to you is still to come, it leaves the last free berth for it. G or a second SHIFT + G stops it; stopped by G, the STATUS LINE reads SWEEP STOPPED.

A DRAGNET that is fitted and ready but has never been armed says so when you press G: the STATUS LINE reads CARGO · AUTO GRAB · SWEEP AVAILABLE, with a SHIFT+G ARM key chip. At most once every 25 s, and not again once you have armed it.

1 2 3 4 5 6 7 8 9 0 Q W E R T Y U I O P A S D F G H J K L Z X C V B N M SHIFT SPACE ENTER
AUTO GRAB status, on the reticle overlay
READY TO SWEEPFitted and idle.
SCANNING FOR CARGOLooking through the selected HARDPOINT camera.
TARGET LOCKA cube is chosen; held 0.18 S before acting.
APA CLEARANCEClaim out.
ENGAGING
REELING INLONGSHOT fitted.
LATCHING
CONFIRMING CAPTUREWaits up to 3 S for APA.
MAGAZINE FULLNo free berth on the head. The sweep holds.
RESTORE POWERPower below 0.35 of nominal.
SELECT A HARDPOINT CAMERACamera 1–4 required.
FIT PEERLESS DRAGNET SEQUENCERNot fitted.
8.4

HARDPOINT racks

A SHIP stores cubes in a HARDPOINT rack: magazines on up to four cargo heads around the spine. The stock SHIP carries one berth on P1. Every rung after that adds the same thing to every head, so the centre of mass stays on the spine and the SHIP flies straight however full it is.

A magazine grows three ways. Cores add length, aft along the spine. A second row adds depth, outward from it. Lane C adds width, on the outer frame. Berths are the product: four heads × cores × rows × lanes.

Heads
P1 DORSAL · P2 STARBOARD · P3 VENTRAL · P4 PORT
Cores
1–10 · 2.4 M APART
Rows
1–2 · 2.12 M APART
Lanes
A B C · 2.12 M APART
Most berths
240 · ONE RIG A PILOT
Feeder
0.45 KW A HEAD
  1. 1BERTH
    8.5 MISSUED
  2. 8BERTHS
    8.5 M720 CR
  3. 16BERTHS
    10.8 M1,260 CR
  4. 32BERTHS
    15.7 M1,750 CR
  5. 64BERTHS
    15.7 M2,110 CR
  6. 96BERTHS
    15.7 M2,260 CR
  7. 240BERTHS
    30.1 M3,760 CR

FIG 8.4-1 · The rack ladder on one SHIP, side and aft, one scale. Every berth is drawn as the cube it holds. Length, then the cumulative kit price.

Rungs, as the HARDPOINT showroom sells them
RungEach headBerthsKitsRung CRTotal CR
No kit1 × 1 × 1 · P1 ONLY1———
4 magazines1 × 1 × 284720720
Core 2 on every head2 × 1 × 21645401,260
Core 3 on every head3 × 1 × 22423001,560
Core 4 on every head4 × 1 × 23221901,750
Outer row on every head4 × 2 × 26443602,110
Lane C on every head4 × 2 × 39621502,260
Core 5 on every head5 × 2 × 312012502,510
Core 6 on every head6 × 2 × 314412502,760
Core 7 on every head7 × 2 × 316812503,010
Core 8 on every head8 × 2 × 319212503,260
Core 9 on every head9 × 2 × 321612503,510
Core 10 on every head10 × 2 × 324012503,760

Feed

A head works one berth, the mouth. The rack moves cubes to and from it one move at a time a head, each move along one axis. A move takes 1 S plus 0.7 S a metre; the carriage takes 0.35 S to return before the next.

AXIALCore to core, along the spine.
LIFTRow to row, out from the spine.
SLIDELane to lane, across the head.

Refit

Kits are fitted in a SERVICE PIT with the SHIP stopped. A head holding, reserving or expecting cargo cannot change shape; the others can. Long cores, from core 5, are fitted with the hold empty and stay on the SHIP. Lane C on a head needs the outer row on the head its frame overhangs. See 10.2.

SECTION BAYS · a second mouth set9.2
SECTION BAY 1AT CORE 32,170 CR
SECTION BAY 2AT CORE 53,175 CR
SECTION BAY 3AT CORE 74,140 CR
SECTION BAY 4AT CORE 95,055 CR

Each bay brings four mouths, four DRONE docks and a camera at each mouth. SHIFT + 1–4 walks a port camera to them; see 5.3.

8.5

Berth addressing

SPINEP1P2P3P4P1-1AQ4P1-1BQ5P1-1CQ6P1-1DQ1P1-1EQ2P1-1FQ3P2-1AQ4P2-1BQ5P2-1CQ6P2-1DQ1P2-1EQ2P2-1FQ3P3-1AQ4P3-1BQ5P3-1CQ6P3-1DQ1P3-1EQ2P3-1FQ3P4-1AQ4P4-1BQ5P4-1CQ6P4-1DQ1P4-1EQ2P4-1FQ3
FIG 8.5-1A full rack seen from aft, core 1 only. P1 in white, the mouth of each head in yellow. Below each plate, the berth's place in its head's delivery queue.

Every berth has a plate. The plate names the head, then the core, then the berth's letter within the core. Letters run along the row first, then out to the next row: A B C on the inner row, D E F on the outer.

P1HEAD
P1–P4
10CORE
1–10, FORE TO AFT
FBERTH
A–C INNER ROW
D–F OUTER ROW

A rack no larger than 2 cores, 2 rows and 2 lanes keeps the short plate it was sold with: P1-A to P1-H, one letter for the whole head. Nothing on a small rack was renamed when the long hull arrived.

NOTEThe mouth is always core 1, outer row, lane A: P1-1D on a full rack, P1-C on a 32, P1-A on the stock SHIP. It is the only berth a head can take a cube into or hand one out of.

P1-1AP1-1DP1-2AP1-2DP1-3AP1-3DP1-4AP1-4DP1-5AP1-5DP1-6AP1-6DP1-7AP1-7DP1-8AP1-8DP1-9AP1-9DP1-10AP1-10D12345678910CORE2.4 M2.12 MROW 1ROW 2← FWDSPINE
FIG 8.5-2P1, lane A, along the spine. Cores are numbered from the cabin aft. Each core adds a plate pair: 1A and 1D at the mouth, 10A and 10D at the tail.

Queue

A head presents cargo last in, first out. Q1 is the mouth and QN the deepest berth. The rack delivers from the front core first, the outer row before the inner, lane A before B. It fills in exactly the reverse order, deepest first, and a claim reserves its berth the same way. When cubes arrive out of turn, APA swaps berth rights between your own reservations on that head so nothing is buried.

On the port console a head of up to 8 berths is drawn as a ring; a deeper head as a queue column, Q1 to Q60. Each cube is filled in its destination ring's colour with the ring's letter, F C A, or S for a spoke. After a RERACK the letter gives way to a two-digit stop number. See 5.7.

Full rack, P1
QPlate
Q1P1-1D
Q2P1-1E
Q3P1-1F
Q4P1-1A
Q5P1-1B
Q6P1-1C
Q7P1-2D
Q8P1-2E
Q9P1-2F
Q10P1-2A
Q11P1-2B
Q12P1-2C
…P1-4C
32-berth rack, P1
QPlate
Q1P1-C
Q2P1-D
Q3P1-A
Q4P1-B
Q5P1-G
Q6P1-H
Q7P1-E
Q8P1-F
8.6

Delivery and payout

A cube goes to one receiver and no other. Fly there; the door opens as you close; at 5.5 M hold G. The same hold first presents a stowed cube to the mouth and then hands it off: the arm carries it into the receiver, which takes it in and shuts. APA checks the hand-off against the receiver and pays per cube, at once.

NOTEG never jettisons. Away from its receiver a stowed cube stays stowed: press G at it and the STATUS LINE reads CARGO STOWED — PRESENT IT AT ITS RECEIVER, its G chip HOLD AT RECEIVER. The step-by-step is 12.1 CARGO RUN.

RANGE TO THE RECEIVER, M 05.511203034405260 DOOR OPEN SHUT OPENS 52 → 34 M CARGO APPROACH RECEIVER — CROWN HIGHSTAR · H · 01 · R868 PRESENT DELIVER NOW APA SHIP WITHIN 10 M AT THE START · CUBE WITHIN 4 M OF THE ANCHOR · ±0.1 M/S OF THE WALL INGEST AFTER ACCEPTANCE, S INGESTING 0.72 CLOSING 0.68 HOLD 0.32 1.8 S · RECEIVER FREE FOR THE NEXT CUBE 2.02 M OPENING 1.6 M CUBE HATCH, FACE ON · 2.38 M FRAME
FIG 8.6-1A delivery to R868, to scale. The door responds to range alone. PRESENT starts at twice the hand-off range, so the cube is at the mouth by the time you reach 5.5 M. Right, the hatch face on: 2.02 M for a 1.6 M cube.

Verification

The plate reads RELEASING while the arm carries the cube in, VERIFYING DELIVERY while APA checks it, then DELIVERED or DELIVERY REJECTED. The receiver checks that it is the right receiver and that the cube arrived inside it, moving with the wall. A refused cube stays yours; the door opens again.

Cockpit readsCause · APA reason
WRONG BAY — DELIVER TO R868This is not the cube's receiver.cube_delivery_target_invalid
TOO FAR FROM APA-TRACKED POSITION — CLOSE INSHIP more than 10 M from the receiver when the hand-off began.cube_transition_range
CUBE OUTSIDE THE RECEIVER — ALIGN AND RETRYCube more than 4 M from the receiver's anchor.cube_receiver_position_mismatch
CUBE NOT MATCHING BAY MOTION — RETRY THE HANDOFFCube not moving with the wall: off by more than 0.1 M/S, or 0.08 in spin.cube_receiver_motion_mismatch
STATION LINK DELAYED — RETRY THE HANDOFFThe SHIP's station fix is more than 2 S old.cube_station_observation_stale
STATION TRACKING INCOMPLETE — RETRY THE HANDOFFThe hand-off arrived without a station fix.cube_station_pose_required
CUSTODY CHANGED — REFRESHING THE LINKCustody moved since the hand-off began.cube_holder_mismatch
APA CARGO — THAT CUBE WAS ALREADY DELIVEREDAlready delivered.cube_delivered
APA REFUSED THE LINK — CUBE RECEIVER BUSYAnother cube is in that receiver.cube_receiver_busy

CAUTIONThe receiver is on a turning station. Match the wall before the hand-off; a cube more than 0.1 M/S off the wall's motion is refused. Rotation rates by radius: 2.4.

NOTEA payout the network drops is kept in this browser and retried, on reconnect and when the tab returns. If no report reaches APA at all, the ZONE files it after 60 S. You do not need to deliver again.

APA SETTLEMENT · UTILITYPAYMENT RECEIVED

PAYMENT RECEIVED

+84 CREDITS

ROUTE FARE RECEIVED // PAYMENT POSTED

UTILITY · MASS STANDARD
BASE PAYMENT
100 CR
CONDITION ADJUSTMENT
−11 CR
CAPTURE ADJUSTMENT
−5 CR
PAYMENT RECEIVED
84 CR
RUN TIME
02:41.6
ROUTE FARE
+84 CREDITS
NEW BALANCE
1,084 CREDITS
DISMISS
FIG 8.6-2The receipt on the right bulkhead: one UTILITY cube at 89 % condition, captured MIDDLE. It closes itself 5 S after settling unless the pointer is on it.

On settlement APA also sends AURELIA PAYLOAD AUTHORITY: DEPOSIT ACCEPTED // +84 CREDITS // NEW BALANCE 1,084 CREDITS, and the OPS ledger adds the cube to CUBES, TODAY and EARNED.

Receipt readsMeaning
VERIFYING DELIVERYAPA is verifying the delivery and calculating payment.
PAYMENT RECEIVEDROUTE FARE RECEIVED // PAYMENT POSTED
CARGO ACCEPTED · NO FAREDelivered at 0 % condition. Nothing is paid.
CONFIRMATION DELAYEDAutomatic payout check queued. No action required.
NO VERIFIED PAYOUTAPA could not verify this run record.
8.7

RERACK

BEFORE · AS PICKED P1P2P3P4 Q1Q2Q3Q4Q5Q6Q7Q8 F A A F F C F C A F F C C A C C F A A A C F C F C A F C C F F C AFTER · ROUTE ORDER P1P2P3P4 Q1Q2Q3Q4Q5Q6Q7Q8 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 RERACK Q1 IS THE MOUTH. A PASS DELIVERS ROW Q1 OF EVERY MOUTH, THEN Q2. FORE CROWN AFT
FIG 8.7-1Example: 32 cubes on four heads, filled in destination ring colour. Before, in picking order. After, the route dealt one stop a head in turn, so each delivery pass takes four consecutive stops. Destinations never change.

Cubes go into the rack in the order you picked them, which is never the order you will deliver them. APA RERACK unloads the whole rack in a SERVICE PIT and reloads it in route order, so the AUTOPILOT's delivery passes are short.

Where
ANY SERVICE PIT · SY-F-01…08 · SY-A-01…08
Fee
10 % OF EACH MOVED CUBE'S FARE
Charged
WITHHELD AT DELIVERY · NEVER UP FRONT
Bay time
10 S + 1 S A CUBE OUT + 1 S BACK
Counted on
THE BUSIEST HEAD · ALL HEADS AT ONCE
Then
BAY RELEASES 20 S AFTER THE WORK

A cube left where it was pays nothing. A cube already racked on this claim is not charged twice. A cube never delivered is never charged. The receipt shows the fee as APA RERACK · 10%.

Bay time, rack full and even
CubesBusiest headWork S
8214
16418
32826
641642
962458

Phases

PREPUNLOADSORTRELOADLOCKRELEASE +20 S

The rack runs on the RERACK tab of SHIP CONFIGURATION as a sorter loop of 20 trays. The port console shows each head LOCKED, then the phase and count. The new layout is committed in one write at the end; until then nothing in the rack has changed.

SVC bulkhead button
RERACK −n%Quoted. n is the cut in AUTOPILOT route length.
RERACK · IN ORDERNothing would move. No fee.
RERACK · NO CARGONothing aboard.
RACKING 18 SRunning. Counts down; past a minute it reads 1:04.
RACKEDDone. Stop numbers are on the port console.

CAUTIONA RERACK must finish inside the pit visit with 2 S to spare. Late in a visit it is refused: This RERACK does not fit in what is left of this trench visit. DETACH and couple again after the lockout.